View Cart (0)
Catalog Quick Shop
My Wish List
Past Catalog Covers
For a fast, faultless job trimming edging on PVC or melamine-edged cupboard doors, this hand trimmer is ideal. Each side has a double-shearing cutter for a flush 90° edge and two chamfering cutters to ease corners to a 20° bevel. 6 blades in all. The chamfering cutters are adjustable from a fully withdrawn position to 1/8" of bevel. Trims both edges at the same time. Blades can be resharpened.
Used to trim the ends of veneer or melamine edge banding flush with panel ends. Just set it on the panel edge and press the lever. Blades can be removed for honing. A simple and effective tool. (Not suitable for hard materials such as Formica®.)
Designed for use on plastics, non-ferrous metals and composites, this file has milled teeth with chip-breaking grooves. It is ideally suited for use with melamine or other laminates. Although both faces are cut, only one edge is cut; the safe edge lets you use the file flush to an upright without marking it. The file is 8" long.
Set of 6 Repl. Blades
Laminate End Trimmer
1998 to 2015 Lee Valley Tools Ltd. and Veritas Tools Inc. All rights reserved.