Lee Valley Tools Woodworking Newsletter
Vol. 1, Issue 5
July 2007
 
From the Archive
 


A Dovetail Joint Puzzle

Excerpt from The Boy Mechanic, Book 1, 1913

A simple but very ingenious example in joinery is illustrated. In the finished piece, Fig. 1, the dovetail appears on each side of the square stick of wood, the illustration, of course, shows only two sides, the other two are identical. The joint is separable and each part is solid and of one piece. In making, take two pieces of wood, preferably of contrasting colors, such as cherry and walnut or mahogany and boxwood, about 1-1/2 in. square and of any length desired. Cut the dovetail on one end of each stick as shown in Fig. 2, drive together and then plane off the triangular corners marked A. The end of each piece after the dovetails are cut appear as shown in Fig. 3, the lines marking the path of the dovetail through the stick.

A Dovetail Joint Puzzle
  How the joint is cut.

Excerpt from The Boy Mechanic, Book 1, 1913

Editor's Note: This is a reprint of an article published in 1913. It describes what was recommended in accordance with the knowledge and practices of the day. While reading it, please consider this fact.

 
 
 

 
Other Articles from this Issue
 
 
What's New in Woodworking
 
One Dozen Mechanical Pencils

One Dozen
Mechanical Pencils
5-Piece Spring-Clip Pliers

5-Piece
Spring-Clip Pliers
Veritas® Surface Clamp

Veritas®
Surface Clamp
Pocket Shop Reference

Pocket
Shop Reference
 
    News & Events  
 
 
  Seminars
 
 
    Features
  From the Collection
Featured Patents
From the Archive
Customer Letters
What Is It?
 
    Subscriber Services
 
 
  Subscribe

Privacy Policy

Newsletter Archive