Designed to cut quickly with minimal friction and heat build-up, these innovative M2 high-speed steel bits have two scoring spurs to limit contact with the wood, and the sides are slightly relieved so only the leading edge touches the wall of the hole.
Chip-breaking grooves machined in the cutting bevels eliminate clogging by splintering waste into small chips that are readily ejected. Available individually and in a boxed set of five sizes from 1/2" to 1" in 1/8" increments.
We offer three specialized sizes for making peppermills: the 1-1/16" is the standard for the central bore; the 1-5/16" and 40mm bits are for our ceramic mechanisms.
We also carry three lengths of bit extender. All forstners and bit extenders have lobed shanks to interlock and prevent slippage in the chuck; a simple insert-and-twist action holds securely yet allows quick changes. The lobed shanks also interlock with the three sizes of Morse taper adapters we offer, allowing you to mount any of the bits and extenders directly in a lathe.
Patented. Made in Germany.
The 1/2" Maxi-Cut Forstner Bit cannot be used with the bit extenders.
Items marked with are not stocked at our retail stores but can be ordered for pick-up at our stores.