Options:
Length
Variations:
-
00M6204 -
SKD330 M6 × 15mm Insert, ea.
1 - $0.96
10 - $0.86 -
00M6205 -
SKD330 M6 × 18mm Insert, ea.
1 - $0.98
10 - $0.88
Rampa SKD330 M6 Inserts
Available in lengths of 15mm and 18mm, these inserts have M6 internal threads. Triple start threads mean these inserts stay aligned when driven and provide a faster feed rate.
Typical pre-drill is 10mm to 10.5mm (about 13/32"). Insert collar is 12mm, giving an overlap of about 1mm around the drilled hole for a good seal and clean appearance.
Zinc-plated steel. Driven with a 6mm hex driver. Priced per insert.
Made in Germany.