Options:
Length
Variations:
-
00M6244 -
SKD330 1/4-20 × 15mm Insert, ea.
1 - $0.76
10 - $0.68 -
00M6245 -
SKD330 1/4-20 × 18mm Insert, ea.
1 - $0.77
10 - $0.69
Rampa SKD330 1/4-20 Inserts
Available in 15mm and 18mm lengths, these inserts have 1/4-20 internal threads. Triple start threads mean these inserts stay aligned when driven and provide a faster feed rate.
Typical pre-drill is 10mm to 10.5mm (about 13/32"). Insert collar is 12mm, giving an overlap of about 1mm around the drilled hole for a good seal and clean appearance.
Zinc-plated steel. Driven with a 6mm hex driver. Priced per insert.
Made in Germany.