Options:
Length
Variations:
-
00M6364 -
SKD30 5/16-18 × 15mm Insert, ea.
1 - $0.76
10 - $0.68 -
00M6365 -
SKD30 5/16-18 × 18mm Insert, ea.
1 - $0.78
10 - $0.70
Rampa SKD30 5/16-18 Inserts
Available in two lengths, these inserts have 5/16-18 internal threads.
Typical pre-drill is 12mm to 12.5mm (about 31/64"). Insert collar is 14mm, giving an overlap of about 1mm around the drilled hole for a good seal and clean appearance.
Zinc-plated steel. Driven with an 8mm hex driver. Priced per insert.
Made in Germany.