Accessibility Statement

Description

Using a rule to set a depth stop or countersink on a drill bit typically requires juggling all three items in one hand while tightening the hex key with the other. This gauge has a V-shaped cross section that helps center and align the bit on the gauge, making it far less awkward and frustrating to hold them together.

The 110° angle accommodates bits up to 1" in diameter. With Imperial and metric scales (graduated in 16ths and millimetres), the 3 1/4" aluminum gauge has an anodized finish and laser-etched markings for ease of reading.

Made in Canada.

Related Products

Registering a 1 1/2"" Pocket Layout Square against the edge of a workpiece while marking a cut line
Using a Veritas 1 1/2"" Pocket Layout Square over a tape measure to strike a line on a workpiece
Using a Veritas 1 1/2"" Pocket Layout Square to measure a small hinge leaf
Using a 1 1/2"" Pocket Layout Square and a striking knife to mark out a hinge gain on a workpiece
Using the protractor scale marked on a 1 1/2"" Pocket Layout Square to lay out an angled cut line
Using the 1/4"" side of the 1 1/2"" Pocket Square’s base to mark out a mortise centered on 3/4"" stock
A woodworker slips a Veritas 1 1/2"" Pocket Layout Square into the pocket of a workshop apron
05N5410 - Veritas 1 1/2"" Pocket Layout Square
05N5410 - Veritas 1 1/2"" Pocket Layout Square

Veritas 1 1/2" Pocket Layout Square

From:

Choose an option to view item availability.

{{price.Quantity}}+ {{price.FormattedPrice}}
Sold Out

{{itemExceptionMessage}}

{{productExceptionMessage}}

Product Added To WishList

Product cannot be added at this time

Choose an option to add an item to your cart.

Online - {{ stockStatus }}

{{ storeName }} - {{ locationStockStatus }}

Set of 7 Collars, with one of them in place on a drill bit as an example
03J9401 - Set of 7 Collars, Imperial

Imperial Split Depth Collars for Drills

(Set of 7)

From:

Choose an option to view item availability.

{{price.Quantity}}+ {{price.FormattedPrice}}
Sold Out

{{itemExceptionMessage}}

{{productExceptionMessage}}

Product Added To WishList

Product cannot be added at this time

Choose an option to add an item to your cart.

Online - {{ stockStatus }}

{{ storeName }} - {{ locationStockStatus }}

86K6501 - Pair of Drill Stops
Large drill stop installed on a drill bit with the small stop sitting beside it

Pair of Plastic Drill Stops

From:

Choose an option to view item availability.

{{price.Quantity}}+ {{price.FormattedPrice}}
Sold Out

{{itemExceptionMessage}}

{{productExceptionMessage}}

Product Added To WishList

Product cannot be added at this time

Choose an option to add an item to your cart.

Online - {{ stockStatus }}

{{ storeName }} - {{ locationStockStatus }}

07J0404 - 1/2" Stop Collar, #10 - #14
07J0403 - 3/8" Stop Collar, #5 - #9

Stop Collars for Drill Bit/Countersink/Counterbore Units

From:

Choose an option to view item availability.

{{price.Quantity}}+ {{price.FormattedPrice}}
Sold Out

{{itemExceptionMessage}}

{{productExceptionMessage}}

Product Added To WishList

Product cannot be added at this time

Choose an option to add an item to your cart.

Online - {{ stockStatus }}

{{ storeName }} - {{ locationStockStatus }}

Surcharge