A. For use with the D4R dovetail jig, the multiple mortise and
tenon attachment will cut blind or through mortises, and flush or raised
tenons from 5/16" x 5/8" to 1-1/2" x 2-1/2". A 1/2"
HSS spiral bit is included. To use this tool, a 1/2" collet plunge
router and a 5/8" O.D. template guide are required.
B. The D4R Pro finger-joint template can produce square half-blind
joints in three basic sizes, plus eleven sizes of box joints, in stock
from 1/8" to 1-1/4" thick. The three supplied eccentric guide bushings
(one for each template finger size) simplify fitting joints by letting
you quickly and precisely change the distance between the cutter and finger
assembly. Also fits any older 24" D-series dovetail jig.
C. The D1600 template can cut four sizes of square half-blind
joints and through joints with six different finger widths in material
from 1/8" to 1" thick. Each includes a special guide bushing
set to adjust for perfect-fitting joints.
to L. Isoloc® Templates
For distinct, curvy shapes, Isoloc joint templates are available. Each
template includes Leigh's boxed five-piece guide bushing set and an instruction
manual. The set of three templates includes all three template styles,
the boxed five-piece guide bushing set and the manual.
Made in Canada.
The products marked with
are not stocked at our retail stores, but can be ordered for pick-up at
Some products are no longer available.