 |
|
 |
| |
| A. It is easiest to think of this as a barrel-shaped
insert nut that secures in any 3/4" diameter hole, |
|
except this one self-anchors and is removable. Usable horizontally,
vertically or at any angle in between, it accepts common 1/2-13
threaded bolts, and will wedge in through-holes in material as thin
as 5/8" (depending on the strength of the material) or in blind
holes 1-1/4" deep. With a pull-out strength of at least 200
lbf* in hardwood, the anchor has a wedging mechanism controlled
by an integral hex-head screw drive and an external rubber O-ring
that uses friction to hold it in place during installation. With
3/8" of internal thread travel, the anchor is designed to secure
materials of known thickness using a fixed length fastener (for
example, fastening 3/4" thick material with a 1" long
machine screw).
Ideal for fastening thin material, it is useful for fixing jigs,
guides, etc. Best used with non-hex head drive fasteners, as the
force applied with a wrench may overpower the anchor, loosening
or dislodging it. All-steel construction.
Made in Canada. Patent pending.
|
|
 |
O-ring holds anchor in
place during installation. |
Wedge adjusts to
secure in dog hole. |
Attach jig with fastener.
|
|
| * In our tests, an anchor, fully seated in a 1-1/4" blind hole,
had a pull-out strength of at least 200 lbf when used in hardwood and 150
lbf when used in softwood. Actual pull-out strength will vary depending
on material used and torque applied. |
| |
| B, C & D. Though any 1/2-13 threaded rod
or bolt may be used with our bench anchor, we offer a small selection
of flat-head and round-head fasteners here for convenience. The 1-1/16"dia.
washer, for use with round-head fasteners, increases the surface contact
area of the head, distributing clamping pressure while reducing the
potential for fiber crushing. All are zinc-plated steel. |
|
|
|
| |
|
|
|
|
1+ |
|
5+ |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| A. |
|
Bench Anchor, ea.
05G22.05     |
|
$12.95 |
|
$11.60 |
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
| B. |
|
1" Fastener, round head, ea.
44Z10.10   |
|
$0.41 |
|
$0.37 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1-1/4" Fastener, round head, ea.
44Z10.12 |
|
$0.44 |
|
$0.40 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1-1/2" Fastener, round head, ea.
44Z10.14 |
|
$0.49 |
|
$0.44 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2" Fastener, round head, ea.
44Z10.18 |
|
$0.54 |
|
$0.48 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| C. |
|
1-1/16" Washer, round head, ea.
44Z10.01 |
|
$0.24 |
|
$0.22 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| D. |
|
1" Fastener, flat head, ea.
44Z10.50 |
|
$0.34 |
|
$0.31 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1-1/4" Fastener, flat head, ea.
44Z10.52 |
|
$0.40 |
|
$0.36 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1-1/2" Fastener, flat head, ea.
44Z10.54 |
|
$0.43 |
|
$0.39 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2" Fastener, flat head, ea.
44Z10.58 |
|
$0.47 |
|
$0.42 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|