Elegant and solid, these corner braces and brackets have been reproduced from items in our hardware collection.
Cast in steel using a lost-wax process, they have well-defined edges without the flash of sand castings. The face of each piece is linished, and should be painted or lacquered before use.
A. The set of four large corner braces is intended for use with stock at least 13/16" thick. Each measures about 4-3/4" per side, and requires five #8 flat-head screws (not included).
B. The set of small corner braces not only adds rigidity to smaller frames, but also provides a considerable amount of appeal. Each has scroll highlights and 1/4" deep interior registration tabs. All edges are bevelled. Overall width/height is 2-5/8". Sold in sets of four. Each brace requires three #6 screws (not included).
C. The center rail brackets are 5-1/4" high and 3-7/8" wide, and require eight #8 screws for the pair (not included). Strong, well made, and attractively priced.