These professional-quality zero-clearance throat
plates help prevent splintering and cut-off kickback.
Machined from rigid 7/16" thick aluminum,
they have end-slots that let you leave the guard/
splitter in place. Interchangeable phenolic inserts
are used to make a zero-clearance plate for any
blade type (standard or thin-kerf crosscut,
combination, etc.) set at any height, or to use
with dado sets up to 13/16". Starter recesses in the
inserts help cut the blade opening. Levelling
screws set the plate and insert flush with the
table; ball detents secure the plate in position.
Each comes with a phenolic insert; extra inserts
sold separately.
Delta models fit Contractor,
Unisaw, tilting arbor saw and other saws with a
3-3/4"x13-3/8"
opening, and have right- or left-bevelled slots for
the splitter.
The Craftsman/Ridgid® plate fits
only 10" belt-drive saws with a 3-3/4"x14"
opening. The left-tilt General 650 plate is
3-1/2"x13-13/16". At 3-9/16"x12-1/2", the Jet 10" right-tilt
Xacta plate fits General International
contractor's saws. The Powermatic 66 plate is
3-15/16"x14-7/16". Well-made accessories that
improve the safety and quality of table-saw
cuts.
Made in U.S.A.
The Plate for General 650, Xacta Plate for Jet 10" Right-Tilt and Plate for Powermatic 66 are not stocked at our retail stores but can be ordered for pick-up.