Made of glass-filled nylon with hardened steel bushings, the jig has a central guide hole for driving in line with a joist; the two other guides allow driving at compound angles where access is difficult, such as next to a wall. You simply drill a pilot hole at each joist and then use the jig over each hole to drive the screw at the correct angle.

The jig includes decking spacers (three 5/16" deck-board spacers, and three 1/4" spacers), a 6" hardened-steel stepped drill bit for drilling pilot holes, a special 6" long thin-diameter Phillips/square-recess driver to fit through the guide bushings when driving deck screws, and depth-stop collars for the drill and driver.

Comes with DVD instructions plus 100 ceramic-coated screws to get you

started. For use with deck boards from

3/4" to 1-1/4" thick and the Kreg screws described below.

Made in the USA.

B. & C. Kreg® Exterior Screws
We offer #8x2" screws made of either ceramic-coated steel or 304 stainless steel for the Kreg deck jig or general exterior use. Both are for natural and

ACQ-treated lumber, as well as synthetic materials, but in especially harsh conditions, the stainless-steel screws offer superior long-term corrosion resistance. They have finishing heads with a combination #1 Phillips/#1 square drive.

Click here* to view our full line of Kreg jigs and accessories.*

		1+	6+
A.	Kreg® Deck Jig Kit	$79.00
	25K60.80
	Replacement Deck Drill Bit, 6"	$17.50
	25K60.81
	Replacement Deck Driver, 6"	$5.95
	25K60.82
B.	Coated Screws, pkg. of 100	$7.60	$6.95
	25K60.85
C.	Stainless-Steel Screws, pkg. of 100	$18.00	$16.55
	25K60.87