| With this modular system, you can create guides, hold-downs and safety accessories that mount independent of the miter slot. Central to the system is an 8-1/2" x 4" universal base that holds two switchable Mag-Jig® rare-earth magnets that can be toggled on or off at the turn of a knob. In the “on” position, the magnets align, instantly affixing to any ferrous surface; switched off, the magnets counteract each other for removal or repositioning. The interchangeable components connect easily to the base with supplied hardware. Base and components are molded from tough ABS. |
|
The following interchangeable components connect easily to the base with
supplied hardware.
The hold-down attachment combines with the featherboard for two uses,
as a hold-down with 1-1/2" of lateral adjustment to secure
work up to 2-1/2" thick, or as a tandem featherboard (includes four risers)
for thick stock.
The 8-1/2" long, 4" high resaw guide has four roller bearings to control
work on a bandsaw. Its cambered surface helps compensate for blade drift.
The dual-roller guide is 8-1/2" long by 4" high and has eight roller bearings to guide long or tall stock for panel raising.
The thin-stock ripping guide helps prevent buckling when cutting thin stock parallel to the grain. One face is stepped to fit 1/8", 1/4", and 3/8" material; the sloped face holds work up to 3/4" thick. An adjustable roller bearing acts as a positive stop to the left of the blade for ripping multiples of the same thickness.
Made from anodized aluminum, the 18" long, 4" high, 1" thick fence
has nine T-tracks (four 1/4"-20 tracks on one face and one
on the top, and four 5/16"-18 tracks on the opposite face). Six 5/16"
through holes and four 3/16" through holes let you mount shop-made fixtures.
All components, including Mag-Jig clamps, are also available individually; if purchased separately, the base includes adapters to accommodate 20mm Mag-Jig clamps (95 lb holding force).
A versatile, reliable system. |
|
Resaw guide with base.
Dual-roller guide with base.
Thin-stock ripping guide with base.
Aluminum fence with base.
|