|
|
|
|
|
 
This is essentially a low-profile bench dog with a quick-release sliding
jaw for holding work. Dubbed a "blade" due to its flat design, it projects
just 1/4" above a work surface to permit maximum access to a workpiece.
Used much like a toggle clamp, it has a thumb-operated eccentric cam lever
to control the sliding jaw, so you can quickly secure or release work.
With 1/4" range of travel, the jaw has limited throw, but applies
up to 300 lb of clamping force. Flats on the cam provide secure stops
at 1/8" and 1/4" of travel. The 1-1/2" x 1/4" jaw face has a 5° inward
cant to help hold wood securely. The cam and jaw are cast steel, heat-treated
for surface hardness, and the post and wedge-lock mechanism are turned
steel.
The patented standard post version is for use in a 3/4" diameter through-hole
(or blind holes that are at least 1-7/8" deep). The wedge-lock version
is usable at any angle from horizontal to vertical, and anchors firmly
in any 3/4" diameter through-hole in material as thin as 5/8" (depending
on the strength of the material), or in blind holes that are a minimum
of 1-3/8" deep.
Made in Canada.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| A. |
|
Bench Blade, Standard Post
05G22.10     |
|
$19.50 |
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
| B. |
|
Bench Blade, Wedge-Lock Post
05G22.12  |
|
$24.50 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|