|
|
|
|
 |
 |
| |
|
|
With two independently adjustable rods, this
gauge lets you set two measurements at once, so you can quickly alternate
between them when transferring or marking repetitive dimensions. Projection
up to 5-3/4" is easy to set, since an internal O-ring keeps light but constant
friction on each rod; a thumbscrew locks the setting.
The hardened steel wheel cutters scribe perfectly at any point of their
circumference. Since they cut wood fibers rather than tear, marks are clean,
even on cross grain. The cutting wheels are oriented with opposing bevels,
ensuring that you can always set the bevel in the waste side of a cut. One
rod has its cutting edge at the extreme end of the rod, making it useful
for transferring dimensions such as tenon shoulder and mortise depth. Each
cutter can be retracted into the brass face for safe storage or to permit
use with a single cutter. The eccentric placement of the rods ensures a
large reference face and helps the gauge resist rolling on a surface. Aluminum
housing with brass face and stainless-steel rods. 7-1/4" overall.
Designed to fit onto the gauge's guide rods, the optional shaft clamp lets
you lock the relative position of the cutters while still being able to
freely adjust the fence for offset. This allows you to preserve identical
mortise or tenon sizing when joining parts of different thicknesses or when
adding a reveal, since it prevents the cutter settings from shifting while
the fence is being repositioned. Machined to precise tolerances to prevent
binding on the rods, the 1/2" long collar is made from extruded aluminum,
with a turned brass thumbscrew that tightens onto the marking gauge's steel
guide rods without marring their surfaces. |
|
 |
| |
|
|
 |
|
Cutting
wheels are oriented with opposing bevels so you can always
set the bevel on the waste side of the cut.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| A. |
|
Veritas® Dual Marking Gauge
05N70.01      |
|
$59.50 |
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
| B. |
|
Veritas® Shaft Clamp
05N70.05   |
|
$9.50 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Veritas® Dual Marking Gauge & Shaft Clamp Set
05N70.10  |
|
$65.00 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| C. |
|
Repl. Outside Cutter
05N70.02 |
|
$4.95 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| D. |
|
Repl. Inside Cutter
05N70.03 |
|
$4.95 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|