| |
Details of the Middle Section:
 |
| 1. Using a specially made marking gauge
to lay out the mortises. |
| |
 |
| 2. The upper side board joins the middle
board with through mortises and tenons in a shallow
stopped dado. |
|
|
 |
| 3. Cleaning out the stopped groove on
the middle board for the upper back panel. |
|
Details
of the Drawer Section:
 |
| 1. Drawer section parts, including the
front and back top strips of the lower case, the
dust board, and the central drawer partition. |
|
|
 |
| 2. The end joints on the top and bottom
horizontal drawer framing. |
|
|
|
