Lee Valley Tools - Woodworking Newsletter

   Woodworking Newsletter
   Vol. 4, Issue 2
   November 2009

Handmade Drawer Pulls


	Gluing and clamping.

To attach, I clamped each drawer and its handle, which was positioned in place, to my bench-top edge. Using wooden dowels as fasteners, I drilled out the holes and glued things up. I have a great old brace I liked using for this, but a hand drill or a drill press would also work fine. Afterwards, I cleaned up the inevitable glue squeeze and applied a good coat of finish to the entire area of each drawer front.

Tom Fidgen
http://tomfidgen.blogspot.com