Stanley/Record Plane Blades made by Veritas®

We offer top-quality replacement blades for other manufacturers’ planes (e.g., Stanley or Record) in A2, O1 or PM-V11™ tool steel. All are lapped on the face side to a flatness tolerance of 0.0005" or better, with an average roughness (Ra) of 5 microinches (0.000005") or better.

Our bench plane blades are 0.100" thick, 25% thicker than the industry standard of 0.080". Increased thickness reduces chatter. All are 7" long, have a 30° bevel and fit almost all makes of the plane sizes listed. Due to minor manufacturing variations over the last century, the pawl on the end of the lateral adjust lever on older planes may have to be filed slightly to fit in the blade slot. Blade widths and plane model numbers are listed.

Block plane blades are 0.125" (1/8") thick with a 25° bevel. The grooves in the blades are for the rear depth-adjust mechanism. Check the width to determine the right blade for your plane; it is either 1-3/8" (low-angle, 60-1/2 style) or 1-5/8" (standard 9-1/2 style). The British-made Stanley planes we carry have a lateral adjust lever and require a 5/8" slot (3 grooves). Planes with no lateral adjust lever (older American Stanley block planes) require a 7/16" slot (8 grooves).

Made in Canada.