|
These are two of the finest planes we have ever made. Though they share
a common pedigree, the polished version represents the first of our premium
plane line, while the black version is part of our standard line.
Both are made to the same exacting standards and have newly refined stainless-steel hardware. The knobs and wheels have elegant elliptical knurled edges for a firm grip. The lever cap has been extensively redesigned to integrate cleanly with the plane body and provide an almost continuous hand-contact surface, with tactile cues for finger placement. The Norris-type adjuster mechanism combines feed and lateral adjustments, making blade setting accurate and easy. Close manufacturing tolerances reduce backlash to no more than 1/4 turn. The adjuster is locked to the body, and will not become inadvertently unseated.
Mouth adjustment is effected by loosening the stainless-steel locking knob. An unobtrusive set screw in the throat of the plane allows repeatable mouth positioning while at the same time preventing the moveable toe from contacting the blade. The toe is completely enclosed by the body casting.
The contoured body is 6-5/8" long by 1-3/4" wide, and has a 12° bed
angle. It is machined and surface ground to half our normal flatness and
surface finish specifications; the sole and sides are flat and square
to within +0.000" and -0.0015" over the entire surface. It comes with
a 9/64" (0.14") thick by 1-3/8" wide blade with a 25° primary bevel
in A2, O1 or PM-V11 tool steel. The back of the blade is lapped flat within
±0.0002" (two-tenths of a thousandth of an inch) in the working
area of the blade.
The premium version (the NX60 Block*) is made from a corrosion-resistant
material — a nickel-resist ductile iron. Significantly more expensive
than regular ductile iron, it contains about 20% nickel and retains all of
the beneficial properties of regular ductile iron. It also requires slower
feed rates during production. The standard version (the DX60 Block*) is made
from our regular ductile iron, has a die-cast lever cap, and is finished with
a durable powder-coat polymer paint.
Made in Canada. Patented.
* In our new number system, the first letter designates the material (Nickel, Bronze, Stainless Steel, Std. Ductile Iron). The number represents the model, and the "X", of course, stands for excellent! |