|
|
|
|
Kreg® Deck Jig
 |
| |
| This jig lets you counterbore screws into the edges of decking
to produce a surface free of exposed fasteners. |
| |
| Made of glass-filled nylon with hardened steel bushings, the
jig has a central guide hole for driving in line with a joist;
the two other guides allow driving at compound angles where
access is difficult, such as next to a wall. You simply drill
a pilot hole at each joist and then use the jig over each hole
to drive the screw at the correct angle. |
| |
| The jig includes decking spacers (three 5/16" deck-board
spacers, and three 1/4" spacers), a 6" hardened-steel
stepped drill bit for drilling pilot holes, a special 6"
long thin-diameter Phillips/square-recess driver to fit through
the guide bushings when driving deck screws, and depth-stop
collars for the drill and driver. |
| |
| Comes with DVD instructions plus 100 ceramic-coated screws
to get you |
|
|
|
| started. For use with deck boards from |
| 3/4" to 1-1/4" thick and the Kreg screws described below. |
| |
| Made in the USA. |
| |
| |
 B.
& C. Kreg® Exterior Screws
We offer #8x2" screws made of either ceramic-coated steel or 304 stainless
steel for the Kreg deck dig or general exterior use. Both are for natural
and |
| ACQ-treated lumber, as well as synthetic materials, but in especially
harsh conditions, the stainless-steel screws offer superior long-term corrosion
resistance. They have finishing heads with a combination #1 Phillips/#1
square drive. |
| |
| |
|
1+ |
6+ |
|
| A. |
Kreg® Deck Jig Kit |
$99.00 |
|
 |
| |
25K60.80     |
|
|
|
| |
Replacement Deck Drill Bit, 6" |
$17.50 |
|
|
| |
25K60.81 |
|
|
|
| |
Replacement Deck Driver, 6" |
$4.90 |
|
|
| |
25K60.82 |
|
|
|
| B. |
Coated Screws, pkg. of 100 |
$7.50 |
$6.90 |
|
| |
25K60.85  |
|
|
|
| C. |
Stainless-Steel Screws, pkg. of 100 |
$17.90 |
$16.50 |
|
| |
25K60.87 |
|
|
|
|
|
|