Leigh Super Jigs
 |
| |
| These newly developed 12", 18", and 24" capacity dovetail
jigs from Leigh are versatile, easy to adjust, and quick to use. |
| |
| Like the D4R jig, they produce through, half-blind, and sliding dovetail
joints. In contrast with the D4R, the design of the side stops also allows
you to make box joints (with 5/16" and 5/8" fingers) and saves
time when routing half-blind joints because the pin and tail boards are
machined concurrently. |
| |
|
A new design of eccentric guide bushing (E-Bush) simplifies fitting
these joints by quickly and precisely changing the relationship
between the cutter and finger assembly.
Made largely from extruded aluminum, these jigs have sturdy cam
locks and non-marring clamping surfaces.
They cut 8° through dovetails in stock from 1/8"
to 13/16" thick, as well as half-blind and sliding dovetails
in material up to 1" thick. Spacing of pins and tails is completely
variable; however, pin
|
|
|
| width depends on the diameter of the cutter. Built-in scales allow rapid
and precise adjustment for material thickness and fine-tuning of through-dovetail
fit. |
| |
| The finger assembly flips to change from through to half-blind mode, automatically
orienting the scale correctly. |
| |
| Includes everything required to get started using a 1/2" router:
1/2" x 8° and 1/2" x 14° dovetail cutters and a 5/16"
x 1" straight cutter (all 8mm shanks), a 1/2" to 8mm collet reducer,
an eccentric guide bushing*, a fully illustrated manual, and an instructional
DVD. |
| |
| Made in Canada. |
| |
| * Fits base plates with a 1-3/16" through bore and a 1-3/8"
counterbore. |
| |
| |
| |
12" Leigh Super Jig |
$259.00
|
|
| |
17N12.12     |
|
|
| |
18" Leigh Super Jig |
$355.00
|
|
| |
17N12.18    |
|
|
| |
24" Leigh Super Jig |
$450.00
|
|
| |
17N12.24 |
|
|
|
|
| Leigh Super Jig & VRS |
| |
|
Each jig is also available as a package with the new vacuum and
router support (VRS). Essentially an aluminum channel with a sliding
vacuum pick-up, this attachment works with any router to effectively
capture dust and support the area of the base plate that overhangs
the finger assembly.
The router rests on the channel and is positioned between two wire
control arms that guide the dust chute below, keeping the chute
aligned with the cutter as it traverses the jig.
Fits vacuum hoses from 1" to 2-1/2". Easily
|
|
|
| attached without modification to the jig using the included hardware,
this is an effective solution to a notoriously tricky dust-collection situation. |
| |
| Made in Canada. |
| |
| |
| |
12" Leigh Super Jig & VRS |
$320.00
|
|
| |
17N12.30 |
|
|
| |
18" Leigh Super Jig & VRS |
$430.00
|
|
| |
17N12.32 |
|
|
| |
24" Leigh Super Jig & VRS |
$515.00
|
|
| |
17N12.34 |
|
|
| |
|
|
|
|
|