Ballpoint Twist Pen Hardware

Discontinued. Limited stock.

These components can be used with any close-grained hardwood (or similar material such as Corian) to make a standard full-turn twist pen. You cut a square blank to length, drill it and insert the brass tubular components, then turn the square to size on a mandrel using soft-iron bushings as size guides. Exterior components have a 24-karat gold finish.

Cross-style refills can be obtained at stationery stores or from us (original pen and refills have blue ink).

Requires our standard mandrel, a pen/pencil bushing set, a 7mm drill and a 1/2" square by 5" long blank.

Online only.