The Veritas® Right-Angle Sled is an extremely
versatile accessory, giving you a foolproof finger-joint system, complete
control of end routing, and a simple, accurate way to dado work up to
8" wide. The sled straddles the router fence for rock-solid support to
the right-angle arm.
- 14" long arm with a 9" wide slide
- Finger-joint keys
- Wooden backing block
With the use of the end-grain backing block on the split bottom extrusion,
tear-out is eliminated on through cuts. Box joints 1/8" wide, and any
width from 1/4" to 3/4", can be made with the integral fingers.
The sled has the same style of T-slot tracks, uses the same T-slot nuts
and is the same height as the main fence, letting you interchange accessories.
The machined slot-joint between the arm and slide guarantees a rigid 90°.
Support work for end routing (e.g., rail and stile work) is easy, as the
arm can be adjusted to leave a 2" gap next to the fence.
half-lap joints or grooves for sliding dovetails or dadoes, the main fence
extrusions can be separated and work passed through the slot. Work up
to 4" wide can be dadoed this way. For work up to 8", the sled is locked
to the fence and, using a pair of position stops at either end, the entire
main fence can be slid back and forth.
This is the fastest and most accurate finger-joint system available for
a router and gives tear-out-free results. Instruction manual included.
Patented. Made in Canada.
If you would like more detailed information on our Router
Table System, consider purchasing our instructional video (available in
DVD or VHS format). The 100-minute video describes the system, its accessories
and overall benefits. This is followed by an instructional presentation
of the information supplied in our manual. (VHS is not compatible for
use outside North America.)