1:16
|
Cutting Curves with a Chisel
How to cut out something round using a chisel and mallet.
|
|
1:34
|
Bench Chisels
An introduction to the Veritas Bench Chisel
|
|
1:22
|
Ergonomics of Digging Tools
How to choose a comfortable digging tool.
|
|
1:25
|
Shaft Clamp
An introduction to the Veritas Shaft Clamp for the Dual Marking Gauge.
|
|
1:05
|
Spades for All Occassions
Selecting a spade or shovel to suit your needs.
|
|
1:23
|
Steel Honing Plate
Using the Veritas Steel Honing Plate with diamond paste to effectively sharpen.
|
|
2:15
|
Pruning Saws
A look at different pruning saw styles and their uses.
|
|
1:19
|
Veritas Iron Edge Plane
The features and uses of the Veritas Iron Edge Plane.
|
|
1:44
|
Veritas Scrub Plane
Why the Veritas Scrub Plane is the tool of choice for major stock removal.
|
|
1:00
|
"Little Shaver" Pencil Sharpener
Why this nostalgic pencil sharpener would be a fun additon to your home or office.
|
|
2:28
|
Veritas Shoulder Planes
A look into a variety of Veritas shoulder planes and their set up.
|
|
1:01
|
Garden Hand Tools
A selection of some common garden hand tools and their uses.
|
|
0:42
|
A Saw for All Seasons
Why the Saw for All Seasons is the perfect tool for removing weeds.
|
|
3:14
|
Ergonomics of Hand Pruners
An introduction to the various pruner styles and their design ergonomics.
|
|
1:22
|
Hori Hori Knife
A look at why the versatile Hori Hori knife is an indispensible garden tool.
|
|
1:37
|
Veritas Small Bevel-Up Smoother
An introduction to the Veritas Small Bevel-Up Smoothing Plane
|
|
5:18
|
Setting Up and Using a Veritas Bevel-Up Plane
Setting up and adjusting the blade in the Veritas bevel-up plane for a finish-ready surface
|
|
0:56
|
Veritas Miniature Router Plane
Getting to know the Veritas Miniature Router Plane
|
|
2:58
|
Setting Up and Using the Veritas Skew Rabbet Plane
Setting up the blade, the scoring blade and the depth stop on the Veritas Skew Rabbet Plane
|
|
1:16
|
Veritas Gent's Saw
Taking a look at the Veritas Gent's saw and its uses
|
|
2:36
|
Setting Up the Veritas Scraping Plane
Preparing the blade and using the Veritas Scraping Plane
|
|
1:39
|
Veritas Magnetic Saw Guide
Using the Veritas Magnetic Saw Guide for joinery cuts
|
|
4:30
|
How to use the Veritas Mk.II Honing Guide
Setting up and using the Veritas Mk.II Honing Guide for sharpening your chisels and plane blades
|
|
1:55
|
Introducing the Veritas Quick-Release and Inset Vises
An introduction to the three bench vise options available from Veritas
|
|
2:14
|
Replacing the Roller on the Mk.II Honing Guide
How to install a replacement roller assembly on the Mk.II Honing Guide
|
|
1:37
|
Veritas Detail Palm Planes
An introduction to the set of four Veritas Detail Palm Planes
|
|
1:51
|
The Veritas Skew Registration Jig
Setting up and using the skew registration accessory for the Mk.II Honing Guide
|
|
1:14
|
Veritas Block Planes
An overview of block planes and their uses
|
|
2:24
|
Sharpening the Veritas Tenon Cutter Blade
Resharpening the blades for the Veritas Power Tenon Cutters using a drill press and a sanding drum
|
|
1:59
|
Veritas Spokeshaves
An introduction to the flat, round and concave Veritas Spokeshaves
|
|
1:35
|
Success With Saws
Sawing technique using the Veritas Dovetail Saw
|
|
1:44
|
The Veritas Dual Marking Gauge
Marking out mortises, tenons and dovetail baselines with the Veritas Dual Marking Gauge
|
|
1:53
|
Using the Veritas Precision Square
The many uses of the Veritas graduated precision square
|
|
2:13
|
Bevel-Up Versus Bevel-Down Planes
Explaining the difference between bevel-up and bevel-down planes
|
|
1:33
|
Advantages of a Marking Knife
Using a striking knife for accurate cut-lines and joinery layout
|
|
1:03
|
Advantages of the Veritas Low-Angle Jack Plane
The features and uses of the Veritas Low-Angle Jack Plane
|
|
2:32
|
Preparing and Using a Card Scraper
Preparing the edge on a card scraper, including jointing and forming the hook
|
|