Accessibility Statement

Comment construire un jeu de poches Cornhole

Comment construire un jeu de poches Cornhole


Outils pour ce projet

Cross-cutting an aluminum extrusion

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Sold out

Festool TS 75 EQ Plunge-Cut Circular S...

$1,105.00 $939.00

05N3501 - Precision Square, Imperial

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Precision Square

$54.50

A board positioned for drilling using a 720 Pro jig held on a workbench with a supplied table clamp

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Kreg 720 Pro Pocket-Hole Jig

$197.00

06K1125 - 25' Tape, R to L 16ths

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Lee Valley 25' Tape for Carpenters

$14.90

Marking a circle on wood using a Pencil Compass

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Lee Valley Pencil Compass

$99.00

Drawing a curved line on wood using a Pica-Dry Mechanical Pencil and a drawing bow

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Pica-Dry Mechanical Pencil

From: $18.90

66J4037 - #10 Carbide Countersink Drill Unit with Low-Friction Depth Stop

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Carbide Countersink Drills with Low-Fr...

From: $36.50

Adjusting the brass front knob on a low-angle block plane on a table edge

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Low-Angle Block Plane

From: $195.00

A man planing a board while wearing the All-Purpose Apron

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

All-Purpose Apron

$249.00

General Arm-R-Seal

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

General Arm-R-Seal

$45.00

Brushing red milk paint onto the top of a small wooden box

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Milk Paint

$24.90

MFT/3 Multifunction Table connected to the CMS-GE router table

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Festool MFT/3 Multifunction Table

From: $975.00

ZA491499 - Guide Rail FS 800/2

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Festool Guide Rails

From: $145.00