Accessibility Statement
Plane Parts

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Plane Parts

In this video, Lee Valley’s Andrew Strome shows us the components of a bevel-down bench plane and walks us through how all these pieces function together.

Great Products for Beginner Woodworkers

Four Plastic Spring Clamps holding a workpiece on a workbench

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Plastic Spring Clamps

From: $2.50

Clamping squares clamped to the inside corners of a butt-jointed box construction for glue-up

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Clamping Squares

From: $9.50

05H4101 - 1x3 Veritas Platform Saddles, set of 4

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas 1" x 3" Platform Saddles

(Set of 4)

$16.50

Drilling a hole in the edge of a board with the replica egg-beater drill

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Lee Valley Replica Egg-Beater Drill

$99.00

Using an electronic caliper to measure the width of a tenon joint

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Blindman's Fractional Electronic Calip...

From: $44.50

Registering a 1 1/2"" Pocket Layout Square against the edge of a workpiece while marking a cut line

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas 1 1/2" Pocket Layout Square

$12.50

Chamfering a dowel with the Japanese woodworking knife

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Japanese Woodworking Knife

$39.90

Slipping a 6" Pocket Rule into an apron pocket

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Pocket Rule

$17.50

Tapping a wooden panel into place with the white side of a replaceable-face mallet

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Halder Simplex Replaceable-Face Mallet

$50.00