Accessibility Statement

Router Sled Hardware Kit

This innovative kit provides the necessary hardware to build a large-capacity router sled for flattening slabs. Woodworker Andrew Tweedy demonstrates.

Router on carrier travels back and forth across the width of the slab

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Router Sled Hardware Kit

$99.00

16J2574 - 1 1/2" Flattening Bit, 1/2” Shank

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Flattening Router Bits

From: $46.40

A 16-inch hairpin leg mounted on the corner of a live-edge coffee table

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

16" Steel Hairpin Leg

$14.90

28-inch hairpin legs mounted on two corners of a live-edge coffee table

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

28" Steel Hairpin Leg

$19.90

Wiping Osmo Polyx hard wax oil onto wood using a cloth

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Osmo Polyx Satin Hard Wax Oil

From: $27.00

Using the Zircon M40 metal detector in pinpoint mode on a wooden floor

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Zircon M40 Metal Detector

$49.50

Front view of Nail Hunter showing curved underside of jaws

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Nail Hunter

$29.50

Front view of man wearing Elipse dust respirator

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Elipse Low-Profile Dust Respirator

$42.50

A man wearing ISOtunes Pro 2.0 corded electronic hearing protectors

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

ISOtunes Pro 2.0 Corded Electronic Hea...

$119.00

A man wearing Professional Safety Glasses

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Professional Safety Glasses

$20.90