Accessibility Statement

Gifts for Woodworking

Using a pair of forceps to remove a loose paintbrush bristle from a freshly painted wooden panel

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Set of 3 Forceps

$7.50

Two Lee Valley clamp racks holding several Anti-Slip Parallel Jaw Clamps and Bessey K-Body REVO clamps

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Lee Valley Clamp Rack

$28.50

Using an electronic caliper to measure the width of a tenon joint

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Blindman's Fractional Electronic Calip...

From: $44.50

10S1060 - RH Spoon Carving Kit

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Spoon Carving Kit

$124.50

Lamp clamped to a workbench, illuminating two water stones, a plane blade and a sharpening jig

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

LED Magnifying Bench Lamp

$89.50

Using a Veritas tabling scribe to mark a cut line on a chair leg

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Tabling Scribe

$39.50

Using a hammer to adjust a plane blade

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Trusty-Cook Slimline Dead-Blow Hammers

From: $33.50

The Digital Moisture Meter being pressed into wood, showing a high reading and red LED indicator.

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Digital Moisture Meter

$34.50

The Veritas card scraper burnisher used on the edge of a scraper that is held in a vise

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Card Scraper Burnisher

$18.50

Measuring a nut with a Brass Caliper

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Brass Caliper

$10.50

Flush-cutting plugs with a Veritas Flush-Cut Saw

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Double-Edge Flush-Cutting Saw

$41.50

Tightening a bolt on a drill press

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Pocket Wrench

$17.50

Using the Veritas Side-Clamping Honing Guide to sharpen a plane blade

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Side-Clamping Honing Guide

$59.00

Using a folding dozuki to cut dovetails in clamped stock

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Folding Dozuki

$74.50

Two Narex Classic Bevel-Edge Chisels lying on a workbench

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Narex Classic Bevel-Edge Chisels

From: $19.90

Measuring tenon shoulder and mortise depth with the Veritas Standard Wheel Marking Gauge

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Standard Wheel Marking Gauge

$42.50

Magnetic Holder & 1/4" Bit Set case lying open to display set of bits

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Magnetic Holder & 1/4" Bit Set

$23.50

68Z8110 - Preppin' Weapon Sanding Block

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Preppin' Weapon Sanding Block

$46.50

Registering a 1 1/2"" Pocket Layout Square against the edge of a workpiece while marking a cut line

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas 1 1/2" Pocket Layout Square

$12.50

Hearing Protectors lying on a workbench

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Over-Ear Hearing Protectors

$39.90

Holding a drill bit against the drill stop gauge while tightening the drill stop hex key

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Drill Stop Gauge

$9.90

05P6501 - Veritas Pocket Plane

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Pocket Plane

$127.00

A man wearing Professional Safety Glasses

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Professional Safety Glasses

$25.50

Veritas Dovetail Saws

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Dovetail Saws

$109.00

A board with a hole drilled in it, with a pocket drilling guide on top and a drill beside it

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Pocket Drilling Guide

$18.50

Pica Big Dry Pencil and holster lying on a board next to a tape measure

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Pica Big Dry Carpenter's Mechanical Pe...

From: $24.00

Installing a nut on a bolt using the Fingertip Magnet

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Fingertip Magnet

$14.90

Using a chisel to make a mortise with a canvas roll of chisels in front

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Lee Valley Bevel-Edge Chisels

From: $22.50

Drilling countersunk holes in the end of a board

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Quick-Change Drill/Countersink Set

$41.90

Measuring a board with a Blindman's tape

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Blindman's Tapes

$11.90

Removing tear-out on a project with a Veritas Scraper

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Scraping Set

$129.50

Plane Screwdriver

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Plane Screwdriver

$32.50

Scribing dovetails using the Japanese spear-point marking knife

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Japanese Spear-Point Marking Knife

$36.50

20L0361 - Sharpen This

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Sharpen This

by Christopher Schwarz

$33.50

Two claw hammers of different lengths with one leaning on two boards, next to a pile of nails

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Estwing Claw Hammers

$69.00

Return to Father's day Gifts