XB820 - Fence-Mount Sprinkler Kit
Plants along fences, walls or foundations often do not get enough water. We devised a sprinkling system that is not only easy to install and low in cost but is also versatile and effective. It consists of a main line that can be attached to a fence or wall and into which you punch holes and mount the sprayers exactly where you want them. Each sprayer is adjustable; you can turn the dial on the sprayer to adjust the water flow or tilt the sprayer to set the spray distance. For plants that don't like water on their leaves, set the line close to ground level so only the soil gets sprayed.
The kit contains 50' of 1/2" header hose, seven adjustable sprayers (two 90° and five 180°), one compression end, one hose connector with a filter washer, a hole punch (for making holes in the header hose), 10 hole plugs (for filling unwanted holes) and instructions. If you are not weaving the line through a chain-link fence or some other structure that will support the hose and hold it in position, you will also need the included set of 10 mounting clips (with screws). Extra parts available separately. Can be attached to any of our other irrigation kits.
The kit contains 50' of 1/2" header hose, seven adjustable sprayers (two 90° and five 180°), one compression end, one hose connector with a filter washer, a hole punch, 10 hole plugs, 10 mounting clips with screws and instructions.
Punch holes in the header hose wherever you want a sprayer, then mount the sprayers at those points.
Yes, turn the dial on the sprayer to adjust the water flow, and tilt the sprayer to set the spray distance.
Set the line close to ground level so only the soil gets sprayed.
Only if you are not weaving the line through a chain-link fence or another structure that will support the hose and hold it in position.
Yes, it can be attached to any of our other irrigation kits.
The 10 hole plugs fill any unwanted holes you punch in the header hose.
| Materials | Plastic hose and sprayers |
| Dimensions | 1/2" × 50' header hose |
| Compatibility | Compatible with other Lee Valley irrigation kits |
| Includes | Header hose; seven adjustable sprayers; compression end; hose connector with filter washer; hole punch; hole plugs; mounting clips with screws; instructions |
| Package Quantity | 1 kit |
| Warranty | Lee Valley Satisfaction Guarantee |
Options:
Variations:
Fence-Mount Sprinkler Kit
Plants along fences, walls or foundations often do not get enough water. We devised a sprinkling system that is not only easy to install and low in cost but is also versatile and effective. It consists of a main line that can be attached to a fence or wall and into which you punch holes and mount the sprayers exactly where you want them. Each sprayer is adjustable; you can turn the dial on the sprayer to adjust the water flow or tilt the sprayer to set the spray distance. For plants that don't like water on their leaves, set the line close to ground level so only the soil gets sprayed.
The kit contains 50' of 1/2" header hose, seven adjustable sprayers (two 90° and five 180°), one compression end, one hose connector with a filter washer, a hole punch (for making holes in the header hose), 10 hole plugs (for filling unwanted holes) and instructions. If you are not weaving the line through a chain-link fence or some other structure that will support the hose and hold it in position, you will also need the included set of 10 mounting clips (with screws). Extra parts available separately. Can be attached to any of our other irrigation kits.
