Delta Casters

These versatile casters are available with two different mounting fittings, permitting a wide range of applications. Made of impact-resistant nylon, the casters have slow-rolling bearings and lever brakes.

The pin and socket versions have a 35mm (1 3/8") long nylon socket that is suitable for installation in the lower edge of cabinet side panels or other narrow surfaces with minimum 10mm (3/8") wall thickness around the socket. Seating in a 14mm (9/16") diameter hole, it accepts the included 10mm (3/8") diameter by 30mm (1 1/4") long steel pin that projects from the caster stem.

The plate-mounted versions have an integral pin that seats in the caster socket while the 3mm (1/8") thick steel mounting plate provides a strong, low-profile attachment point. Requires a 65mm (2 9/16") square mounting area and four #12 screws (not included).

Both versions are available in two sizes: 50mm (2") diameter wheels with a load capacity of 50kg (110 lb) and 80mm (3 1/8") diameter wheels with a load capacity of 80kg (176 lb).

Made in Germany.