00W1200 - 38mm x 7mm Catch
Dimensions:
Choose an option to view item availability.
These are considerably stronger latches than the simple bullet type, although they function in much the same way. In this case, two balls snap over a keeper (or strike) with adjustable pressure, allowing variable spacing between the balls. This adjustable spacing lets the keeper enter the catch from the front or either side, making it usable on overlay or inset doors.
Size stated is the overall height by width. The 38mm × 7mm, 43mm x8mm and 50mm × 9mm catches require #4 screws; the 60mm × 11mm and 70mm × 13mm catches require #5 screws (not included).
These extruded double-ball catches use two spring-loaded balls instead of one, giving more holding strength than a standard single-ball bullet catch while working the same way: two balls snap over a keeper to hold the door shut.
Yes, the adjustable ball spacing lets the keeper enter the catch from the front or either side, so the same catch works on overlay or inset door installations.
The three smaller sizes, 38mm × 7mm, 43mm × 8mm and 50mm × 9mm, take #4 screws, while the two larger sizes, 60mm × 11mm and 70mm × 13mm, take #5 screws; screws are not included.
| Dimensions | 38mm × 7mm; 43mm × 8mm; 50mm × 9mm; 60mm × 11mm; 70mm × 13mm (height × width, each size) |
| Compatibility | Fits overlay or inset cabinet doors; accepts #4 screws (38mm × 7mm, 43mm × 8mm, 50mm × 9mm sizes) or #5 screws (60mm × 11mm, 70mm × 13mm sizes) |
| Includes | Double-ball catch |
| Package Quantity | 1 item |
| Warranty | Lee Valley Satisfaction Guarantee |
Options:
Dimensions
Variations:
Extruded Double-Ball Catches
These are considerably stronger latches than the simple bullet type, although they function in much the same way. In this case, two balls snap over a keeper (or strike) with adjustable pressure, allowing variable spacing between the balls. This adjustable spacing lets the keeper enter the catch from the front or either side, making it usable on overlay or inset doors.
Size stated is the overall height by width. The 38mm × 7mm, 43mm x8mm and 50mm × 9mm catches require #4 screws; the 60mm × 11mm and 70mm × 13mm catches require #5 screws (not included).
Choose an option to view item availability.
Choose an option to view item availability.
Choose an option to view item availability.
Choose an option to view item availability.
