Q: How much weight can these hangers support?
Each hanger supports up to 75kg (165 lb) when properly installed.
01S1945 - Adjustable Cabinet Hangers, pair
Easy to install, these wall-mount steel cabinet hangers allow a range of vertical and tilt adjustment (up to 1/2") without having to remove any part of the cabinet assembly. Two hangers mounted on the back of the cabinet seat securely in channels in the included wall-mounting plates. Two small slots (approximately 1/2" × 2 1/16") cut into the rear cabinet panel permit access to the positioning mechanisms, which are adjusted independently using a #2 Phillips or Pozidriv bit (not included).
Included low-profile plastic caps press-fit in place, concealing the access slots. The hangers can also be locked to prevent the cabinet from being accidentally dislodged from the wall. Supplied in sets of two hangers (3 7/8" × 1 7/8" overall), two mounting plates and two concealer caps. Each hanger supports up to 75kg (165 lb).
Each hanger supports up to 75kg (165 lb) when properly installed.
Yes, adjustable cabinet hangers let you fine-tune the vertical and tilt position up to 1/2" without removing any part of the cabinet assembly.
You'll need a #2 Phillips or Pozidriv bit to turn the adjustment mechanism; the bit itself isn't included.
Yes, the hangers can be locked to help prevent the cabinet from being accidentally dislodged once it's set.
| Materials | Steel hangers; plastic concealer caps |
| Dimensions | 3 7/8" × 1 7/8" (per hanger) |
| Capacity | Maximum 75kg (165 lb) per hanger |
| Includes | Two hangers; two mounting plates; two concealer caps |
| Package Quantity | 1 pair |
| Warranty | Lee Valley Satisfaction Guarantee |
Options:
Variations:
Adjustable Cabinet Hangers
Easy to install, these wall-mount steel cabinet hangers allow a range of vertical and tilt adjustment (up to 1/2") without having to remove any part of the cabinet assembly. Two hangers mounted on the back of the cabinet seat securely in channels in the included wall-mounting plates. Two small slots (approximately 1/2" × 2 1/16") cut into the rear cabinet panel permit access to the positioning mechanisms, which are adjusted independently using a #2 Phillips or Pozidriv bit (not included).
Included low-profile plastic caps press-fit in place, concealing the access slots. The hangers can also be locked to prevent the cabinet from being accidentally dislodged from the wall. Supplied in sets of two hangers (3 7/8" × 1 7/8" overall), two mounting plates and two concealer caps. Each hanger supports up to 75kg (165 lb).
Choose an option to view item availability.
Choose an option to view item availability.
