Q: What size dado does this track need?
It requires a 7/16" × 7/8" dado, cut just slightly deeper than the track's thickness so the top surface sits flush with or just below the table or jig surface.
12K7932 - 5/16" T-Slot, 2'
Length:
Choose an option to view item availability.
Our aluminum extrusions are among the most useful components for making jigs and fixtures. Sized to fit 5/16-18 hardware, they can be used with T-slot nuts or T-bolts. Optional hex bolt shoulder washers allow them to be used with commonly available hex bolts. (Nuts, bolts and washers available separately.)
The T-slot fits into a 7/16" × 7/8" dado. It has a central V-groove for ease of drilling, and the outside surfaces are fluted to provide a strong mechanical lock when glued. Made in Canada by Veritas, they are anodized for wear resistance and to prevent oxidation. Available in 2', 3', or 4' lengths.
It requires a 7/16" × 7/8" dado, cut just slightly deeper than the track's thickness so the top surface sits flush with or just below the table or jig surface.
Screws are the better choice: gluing traps the track in one spot permanently and, if it lifts after the glue cures, it's difficult to fix, while screwed-in track can be removed and reused.
Yes, cyanoacrylate or epoxy both work for gluing in these veritas t-slot tracks (5/16-18 thread), though with epoxy the dado should be cut slightly deeper than needed since its gap-filling properties can otherwise keep the track from fully seating.
You'll need a drill or drill press, an 82-degree countersink sized to the screw, a 3/16" or 5/32" drill bit, mounting hardware and shims for fine height adjustment.
Yes, cut it with a hacksaw or a bandsaw fitted with a metal-cutting blade, then deburr the cut edges with a belt sander, flap wheel or file.
| Materials | Aluminum |
| Dimensions | Available in 2', 3' or 4' lengths; 7/16" × 7/8" dado cross-section (H × W). |
| Compatibility | Fits a 7/16" × 7/8" dado; accepts 5/16-18 T-slot nuts, T-bolts or (with optional shoulder washers) hex bolts |
| Includes | T-slot track |
| Color/Finish | Anodized for wear and oxidation resistance. |
| Package Quantity | 1 item |
| Country of Origin | Canada |
| Warranty | Lee Valley Satisfaction Guarantee |
Options:
Length
Variations:
Veritas T-Slot Tracks (5/16-18 Thread)
Our aluminum extrusions are among the most useful components for making jigs and fixtures. Sized to fit 5/16-18 hardware, they can be used with T-slot nuts or T-bolts. Optional hex bolt shoulder washers allow them to be used with commonly available hex bolts. (Nuts, bolts and washers available separately.)
The T-slot fits into a 7/16" × 7/8" dado. It has a central V-groove for ease of drilling, and the outside surfaces are fluted to provide a strong mechanical lock when glued. Made in Canada by Veritas, they are anodized for wear resistance and to prevent oxidation. Available in 2', 3', or 4' lengths.
Choose an option to view item availability.
Choose an option to view item availability.
Choose an option to view item availability.
Choose an option to view item availability.
