Perfume Applicator Hardware

Discontinued. Limited stock.

These components can be used with any close-grained hardwood (or similar material such as Corian) to make a perfume applicator. You cut a square blank to length, drill it and insert the brass tubular components, then turn the square to size on a mandrel using soft-iron bushings as size guides. Exterior components have a 24-karat gold finish.

Perfume is stored by a wick inserted in the brass sleeve. Felt applicator tip.

Requires a standard mandrel, the perfume applicator bushing set, a 5/16" (8mm) drill bit and a 1/2" square by 5" long blank.

Online only.