01A5790 - Old Brass Label Holder
Choose an option to view item availability.
Pressed brass label holders with one open side for label insertion. Available in old brass, chrome plate or antique brass finishes.
Each is 80mm wide by 29mm high.
Mount with brads (included) or #2 screws.
Finish:
Select Finish to view refined specifications:
| Item Number | Finish Tone | Center to Center | Length | Width | Projection | Base Width | Hardware Included |
|---|---|---|---|---|---|---|---|
 01A5790 | Yellow|Brass | 75 mm | 80 mm(3 1/8") | 29 mm(1 1/8") | 2 mm(1/16") | 30 mm(1 3/16") | Y |
 01A5791 | Grey|Chrome | 75 mm | 80 mm(3 1/8") | 29 mm(1 1/8") | 2 mm(1/16") | 30 mm(1 3/16") | Y |
 01A5792 | Yellow|Brass | 75 mm | 80 mm(3 1/8") | 29 mm(1 1/8") | 2 mm(1/16") | 30 mm(1 3/16") | Y |
Options:
Finish
Variations:
Label Holders
Pressed brass label holders with one open side for label insertion. Available in old brass, chrome plate or antique brass finishes.
Each is 80mm wide by 29mm high.
Mount with brads (included) or #2 screws.
