Q: How much can I adjust the shelf height with these strips?
The mounting holes are spaced to let a shelf move up or down in 1/2" increments, giving fine control over spacing without redrilling.
17K4001 - 36" Gold-Tone Pilaster Strip
Finish:
Length:
Choose an option to view item availability.
At 5/8" wide and only 3/16" deep, these strips can be set in a routed recess or used surface mounted. A fast and effective way to enable shelf adjustment in 1/2" increments.
Stamped numbers (repeating from 1 to 5) every two holes make it easy to ensure clips are all in the correct places for each shelf. Available in three finishes, with color-matched clips sold separately.
Mounting screw holes are found every 4 1/2"; require #4 flat-head screws (not included).
The mounting holes are spaced to let a shelf move up or down in 1/2" increments, giving fine control over spacing without redrilling.
Yes, they mount with #4 flat-head screws, which aren't included, driven through the holes spaced every 4 1/2" along the strip.
Recessing the strip into a routed channel keeps the cabinet interior flush and is the better choice for a finished built-in, while surface mounting is faster and works well for utility shelving or retrofits; choose recessed mounting whenever the interior appearance matters.
These pilaster strips use stamped numbers that repeat every two holes so you can set matching shelf-pin positions on strips installed on opposite sides of a cabinet without counting holes each time.
No, color-matched clips are available separately from the strips, so plan to order them if you don't already have compatible shelf pins.
| Materials | Steel |
| Dimensions | 5/8" wide × 3/16" deep; mounting holes spaced 4 1/2" apart; available in 36", 60" and 96" lengths |
| Compatibility | Compatible with shelf pins in 1/2" increment positions |
| Includes | Pilaster strip |
| Color/Finish | Gold-Tone, White or Zinc |
| Package Quantity | 1 item |
| Warranty | Lee Valley Satisfaction Guarantee |
Options:
Finish,Length
Variations:
Pilaster Strips
At 5/8" wide and only 3/16" deep, these strips can be set in a routed recess or used surface mounted. A fast and effective way to enable shelf adjustment in 1/2" increments.
Stamped numbers (repeating from 1 to 5) every two holes make it easy to ensure clips are all in the correct places for each shelf. Available in three finishes, with color-matched clips sold separately.
Mounting screw holes are found every 4 1/2"; require #4 flat-head screws (not included).
Choose an option to view item availability.
