50F0130 - Toggle Clamp Plate, T-Track
With this mounting plate, you can use a regular Bessey auto-adjust toggle clamp in a T-slot, securing it at any point on the track. Two sets of mounting holes let you attach the toggle clamp in line with the T-slot track or perpendicular to it. The plate also has two holes for attaching the plate to a T-track miter-slot slider bar such as the Incra Miter Slider bars, so you can use your saw table as a surface for assembly work.
The thickness of the aluminum plate adds 3/8" to the maximum capacity of the horizontal clamps, but doesn't affect their minimum; you can still adjust the clamps to hold materials as thin as a sheet of paper against a surface. The center height of the in-line clamp is increased to 1 1/4". Includes four bolts for mounting a clamp and two 1/4-20 T-bolts and knobs. Made in Canada.
We also offer the T-track toggle clamp plate as a set with a high-profile horizontal, low-profile horizontal, in-line or vertical clamp.
These t-track toggle clamp plate fittings let you mount a standard Bessey auto-adjust toggle clamp anywhere along a T-slot track, oriented either in line with the slot or across it, instead of being limited to fixed clamp positions.
No, minimum clamping capacity stays the same, thin enough for paper-like materials; the plate only adds 3/8" to the clamp's maximum reach.
Yes, two additional holes fit T-track miter-slot slider bars, such as Incra Miter Sliders, which lets you set up clamping on a saw table used as an assembly surface.
It includes four mounting bolts along with two 1/4-20 T-bolts and knobs, enough to install the plate and secure the clamp to it.
It's made in Canada.
| Materials | Aluminum |
| Compatibility | Fits standard Bessey auto-adjust toggle clamps and T-track miter-slot slider bars (e.g., Incra Miter Sliders) |
| Includes | Mounting plate; bolts; T-bolts; knobs |
| Package Quantity | 1 item |
| Country of Origin | Canada |
| Warranty | Lee Valley Satisfaction Guarantee |
Options:
Variations:
T-Track Toggle Clamp Plate
With this mounting plate, you can use a regular Bessey auto-adjust toggle clamp in a T-slot, securing it at any point on the track. Two sets of mounting holes let you attach the toggle clamp in line with the T-slot track or perpendicular to it. The plate also has two holes for attaching the plate to a T-track miter-slot slider bar such as the Incra Miter Slider bars, so you can use your saw table as a surface for assembly work.
The thickness of the aluminum plate adds 3/8" to the maximum capacity of the horizontal clamps, but doesn't affect their minimum; you can still adjust the clamps to hold materials as thin as a sheet of paper against a surface. The center height of the in-line clamp is increased to 1 1/4". Includes four bolts for mounting a clamp and two 1/4-20 T-bolts and knobs. Made in Canada.
We also offer the T-track toggle clamp plate as a set with a high-profile horizontal, low-profile horizontal, in-line or vertical clamp.
Choose an option to view item availability.
Choose an option to view item availability.
Choose an option to view item availability.
Choose an option to view item availability.
