Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologoCart
Cart
05N0530 - Set of 4 Bench Rules – 6", 12", 18" & 24"
Using a pencil and a Veritas bench rule to render a scale drawing of a bench from a maquette
Using a pencil and a Veritas bench rule to mark a cut line on a wooden workpiece
Using a pencil and a Veritas bench rule to render a scale drawing on a Veritas scratch pad
Using a Veritas bench rule to take measurements from a maquette of a bench
A close-up end view of a Veritas bench rule, showing a cross-section of the aluminum extrusion
A close-up end view of a Veritas bench rule, showing a cross-section of the aluminum extrusion
Slipping a Veritas 6"" bench rule into the pocket of a workshop apron
05N0530 - Set of 4 Bench Rules – 6", 12", 18" & 24"

05N0530 - Set of 4 Bench Rules – 6", 12", 18" & 24"

Set of 4 Veritas Imperial Aluminum Bench RulesMade in Canada

Set (4)

(0 Reviews)
Item 05N0530, Set of 4 Bench Rules – 6", 12", 18" & 24"
  • Full Imperial Set: 6", 12", 18", and 24":: Four lengths cover the range from close layout work with the 6" rule to wide-panel marking with the 24".
  • Tapered Edges Minimize Parallax:: Each rule is cut from a solid aluminum extrusion with tapered edges that lie within 0.01" of the stock surface, reducing the parallax error that comes from a thick rule elevated above the work.
  • Raised Feet Prevent Smudging:: Small feet set back from each edge hold the rule just clear of the work surface, so the rule doesn't smudge fresh pencil or ink lines as it's repositioned.
  • Fine Laser-Etched Graduations:: Markings are laser-etched against a matte black anodized finish for high contrast, graduated in 1/32" increments on both edges.
  • Bidirectional Scales for Flexible Layout:: One edge reads left to right and the other right to left, allowing direct measurement from either end without flipping the rule.
  • Solid Aluminum Extrusion Construction:: Cut directly from an aluminum extrusion rather than stamped, each rule is rigid and consistent in width — 1" for the 6" and 12" rules, 1 1/4" for the 18" and 24".
More details
$49.50
Online: Loading...
: Loading...
Veritas Bench Rules
Shop Our Complete Line of Veritas Bench Rules

Shaped much like a classic school ruler, these relatively narrow rules are lightweight and easy to handle, making them an ideal choice for precise drawing and design tasks.

The fine laser-etched markings stand out clearly against the matte black anodized finish, with one edge that reads right to left and the other left to right. All scales are graduated in in 1/32" increments.

Each rule is cut from a solid aluminum extrusion. To avoid parallax errors, the edges are tapered and lie within 0.01" of the stock surface, supported by small raised feet set back from each edge. This clearance ensures markings will not be smudged by the rule.

This full Imperial set includes 6", 12", 18" and 24" rules. The two shorter rules are 1" wide, and the longer rules are 1 1/4" wide.

Excellent tools for layout and design work. Made in Canada.

The rules are also available in metric sizes, as well as in combined versions with both scales, sold individually as well as in sets.


05N0530 - Set of 4 Bench Rules – 6", 12", 18" & 24"

Options:

Variations:

  • 05N0530 - Set of 4 Bench Rules – 6", 12", 18" & 24"
    1 - $49.50

Set of 4 Veritas Imperial Aluminum Bench Rules

Shaped much like a classic school ruler, these relatively narrow rules are lightweight and easy to handle, making them an ideal choice for precise drawing and design tasks.

The fine laser-etched markings stand out clearly against the matte black anodized finish, with one edge that reads right to left and the other left to right. All scales are graduated in in 1/32" increments.

Each rule is cut from a solid aluminum extrusion. To avoid parallax errors, the edges are tapered and lie within 0.01" of the stock surface, supported by small raised feet set back from each edge. This clearance ensures markings will not be smudged by the rule.

This full Imperial set includes 6", 12", 18" and 24" rules. The two shorter rules are 1" wide, and the longer rules are 1 1/4" wide.

Excellent tools for layout and design work. Made in Canada.

The rules are also available in metric sizes, as well as in combined versions with both scales, sold individually as well as in sets.

Related Products

05N0531 - Set of 4 Bench Rules – 6"/150mm, 12"/300mm, 18"/450mm & 24"/600mm
Using a pencil and a Veritas bench rule to render a scale drawing of a box from a maquette
Using a pencil and a Veritas bench rule to render a scale drawing on a Veritas scratch pad
Using a pencil and a Veritas bench rule to mark a cut line on a wooden workpiece
Using a pencil and a Veritas bench rule to mark a cut line on a wooden workpiece
Using a Veritas bench rule to take measurements from a maquette of a box
A close-up end view of a Veritas bench rule, showing a cross-section of the aluminum extrusion
A close-up end view of a Veritas bench rule, showing a cross-section of the aluminum extrusion
Slipping a Veritas 6""/150mm bench rule into the pocket of a workshop apron
05N0531 - Set of 4 Bench Rules – 6"/150mm, 12"/300mm, 18"/450mm & 24"/600mm
Set of 4 Veritas Imperial/Metric Aluminum Bench Rules
Product Information
05N0532 - Set of 4 Bench Rules – 150mm, 300mm, 450mm & 600mm
Using a pencil and a Veritas bench rule to render a scale drawing of a bench from a maquette
Using a pencil and a Veritas bench rule to render a scale drawing on a Veritas scratch pad
Using a pencil and a Veritas bench rule to mark a cut line on a wooden workpiece
Using a pencil and a Veritas bench rule to mark a cut line on a wooden workpiece
Using a Veritas bench rule to take measurements from a maquette of a bench
A close-up end view of a Veritas bench rule, showing a cross-section of the aluminum extrusion
A close-up end view of a Veritas bench rule, showing a cross-section of the aluminum extrusion
Slipping a Veritas 150mm bench rule into the pocket of a workshop apron
05N0532 - Set of 4 Bench Rules – 150mm, 300mm, 450mm & 600mm
Set of 4 Veritas Metric Aluminum Bench Rules
Product Information
05N0430 - Set of 3 Shop Rules – 12", 18" & 24"
Using a pencil and a 24" shop rule to mark a plywood panel
Three sizes of imperial shop rules hung on a pegboard workshop wall near a drill press
A close-up end view of a Veritas shop rule, showing a cross section of the aluminum extrusion
Marking a sheet of plywood using a Veritas shop rule to measure from a panel edge
Using the left-to-right scale of a shop rule to measure from the left edge of a panel
Using the right-to-left scale of a shop rule to measure from the right edge of a panel
Standing a shop rule on end to lay out hinge locations on an inside wall of a cabinet
Registering the end of a shop rule against an inside wall of a cabinet carcass
Using a pencil and a shop rule to mark hinge locations on an inside cabinet wall
Using a shop rule on a bandsaw to set the distance between the fence and blade
05N0430 - Set of 3 Shop Rules – 12", 18" & 24"
Set of 3 Veritas Imperial Shop Rules
Product Information
05N0431 - Set of 3 Shop Rules – 12"/300mm, 18"/450mm & 24"/600mm
Using a pencil and a shop rule to mark a plywood panel
Three sizes of metric shop rules hung on a pegboard workshop wall near a drill press
A close-up end view of a Veritas shop rule, showing a cross section of the aluminum extrusion
Using a pencil and a shop rule to mark a plywood panel
Using a pencil and a shop rule to mark a plywood panel
Standing a shop rule on end to lay out hinge locations on an inside wall of a cabinet
Registering the end of a shop rule against an inside wall of a cabinet carcass
Using a pencil and a shop rule to mark hinge locations on an inside cabinet wall
Set of 3 Veritas Imperial/Metric Shop Rules
Set of 3 Veritas Imperial/Metric Shop Rules
Product Information