Quantity:
About Veritas seconds: this stock of our custom #7 jointer plane (06P0771A) has some minor cosmetic flaw – a scratch, a pit in the casting or tiny blemishes – but the plane is functionally perfect. Quantities of seconds are limited and expected to sell out quickly.
This is the standard configuration of our custom #7 jointer plane. The body is made of fully stress-relieved ductile cast iron, and the sole is machined flat and square to the sides and has extra-large side wings for stable shooting. The Norris-style combined feed and lateral adjustment mechanism allows easy and accurate blade setting. Two set screws register the blade in the throat.
The movable toe plate allows quick mouth adjustments – loosening the front knob lets you close the mouth to a narrow slit for fine shavings and minimum tear-out or open it for heavier cuts. A stop screw in the throat retains mouth settings and prevents accidental contact with the blade. The cap iron registers on and attaches to a low-profile blade carrier attached to the blade, which allows you to easily restore the cap iron to the same position after removal for blade sharpening. Two tapped holes in either side allow the mounting of an optional fence, available separately.
Measuring 22" long and 3" wide and weighing 8 lb 9 oz, this plane provides the mass and accuracy needed for jointing. Its size also makes it useful for preliminary levelling of surfaces on wide boards.
The included 2 3/8" wide PM-V11 blade has a lapped face and is ground with a bevel that requires only final honing to 30° before use.
The 45° frog offers a cutting angle that is suitable for most work. Also known as common pitch, it is the most frequently used bed angle for bevel-down planes.
The plane comes with a wide knob and a Veritas medium tote made of domestic torrefied maple.
Patented. Made in Canada.
Options:
Variations:
Veritas Custom #7 Jointer Plane, Standard Configuration – Manufacturing Second
About Veritas seconds: this stock of our custom #7 jointer plane (06P0771A) has some minor cosmetic flaw – a scratch, a pit in the casting or tiny blemishes – but the plane is functionally perfect. Quantities of seconds are limited and expected to sell out quickly.
This is the standard configuration of our custom #7 jointer plane. The body is made of fully stress-relieved ductile cast iron, and the sole is machined flat and square to the sides and has extra-large side wings for stable shooting. The Norris-style combined feed and lateral adjustment mechanism allows easy and accurate blade setting. Two set screws register the blade in the throat.
The movable toe plate allows quick mouth adjustments – loosening the front knob lets you close the mouth to a narrow slit for fine shavings and minimum tear-out or open it for heavier cuts. A stop screw in the throat retains mouth settings and prevents accidental contact with the blade. The cap iron registers on and attaches to a low-profile blade carrier attached to the blade, which allows you to easily restore the cap iron to the same position after removal for blade sharpening. Two tapped holes in either side allow the mounting of an optional fence, available separately.
Measuring 22" long and 3" wide and weighing 8 lb 9 oz, this plane provides the mass and accuracy needed for jointing. Its size also makes it useful for preliminary levelling of surfaces on wide boards.
The included 2 3/8" wide PM-V11 blade has a lapped face and is ground with a bevel that requires only final honing to 30° before use.
The 45° frog offers a cutting angle that is suitable for most work. Also known as common pitch, it is the most frequently used bed angle for bevel-down planes.
The plane comes with a wide knob and a Veritas medium tote made of domestic torrefied maple.
Patented. Made in Canada.
