Quantity:
About Veritas seconds: this stock of our PM-V11 bevel-up jointer plane (05P3771) has some minor cosmetic flaw – a scratch, a pit in the casting or tiny blemishes – but the plane is functionally perfect. Quantities of seconds are limited and expected to sell out quickly.
The Veritas low-angle jointer is the largest member of our bevel-up bench plane family. At 22" × 2 7/8" and weighing 7 lb 8 oz, it is ideal for jointing edges and flattening large panels.
The body is fully stress-relieved ductile cast iron, with a sole that is flat and square to the sides. An adjustable throat plate allows a wide range of mouth adjustment. Our unique stop-screw retains mouth settings while preventing blade damage when removing and replacing blades.
The bevel-up blade configuration results in a plane that is versatile and straightforward to use. The 12° bed angle, coupled with the 25° blade bevel, creates an effective cutting angle of 37°. Simply increasing the blade bevel results in higher cutting angles for improved performance in more difficult-grained woods.
Includes a lapped 3/16" (0.187") thick blade, 2 1/4" wide, in PM-V11 tool steel. For working difficult grain, lapped 38° and 50° blades and a toothed A2 blade are available.
The Veritas low-angle jointer fence (available separately) enables you to shoot consistent and accurate square or bevelled edges with your Veritas bevel-up jointer.
Made in Canada.
Options:
Variations:
Veritas Bevel-Up Jointer Plane – Manufacturing Second
About Veritas seconds: this stock of our PM-V11 bevel-up jointer plane (05P3771) has some minor cosmetic flaw – a scratch, a pit in the casting or tiny blemishes – but the plane is functionally perfect. Quantities of seconds are limited and expected to sell out quickly.
The Veritas low-angle jointer is the largest member of our bevel-up bench plane family. At 22" × 2 7/8" and weighing 7 lb 8 oz, it is ideal for jointing edges and flattening large panels.
The body is fully stress-relieved ductile cast iron, with a sole that is flat and square to the sides. An adjustable throat plate allows a wide range of mouth adjustment. Our unique stop-screw retains mouth settings while preventing blade damage when removing and replacing blades.
The bevel-up blade configuration results in a plane that is versatile and straightforward to use. The 12° bed angle, coupled with the 25° blade bevel, creates an effective cutting angle of 37°. Simply increasing the blade bevel results in higher cutting angles for improved performance in more difficult-grained woods.
Includes a lapped 3/16" (0.187") thick blade, 2 1/4" wide, in PM-V11 tool steel. For working difficult grain, lapped 38° and 50° blades and a toothed A2 blade are available.
The Veritas low-angle jointer fence (available separately) enables you to shoot consistent and accurate square or bevelled edges with your Veritas bevel-up jointer.
Made in Canada.
