Quantity:
About Veritas seconds: this stock of our right-hand PM-V11 skew rabbet plane (05P4577) has some minor cosmetic flaw – a scratch, a pit in the casting or tiny blemishes – but the plane is functionally perfect. Quantities of seconds are limited and expected to sell out quickly.
With a blade skewed at a 30° angle to reduce cut resistance and aid in shaving clearance, this plane cuts quickly and quietly, avoiding the set-up, noise and dust associated with power tools.
Corner cuts are clean and accurate. Tear-out on cross-grain work is reduced with a scoring spur that sits ahead of the blade. The 7 3/8" long fence allows a maximum rabbet width of 1 1/2" and is through-drilled to accept a wooden extension. An adjustable shoe controls the rabbet depth to a maximum 3/4" deep.
Supplied with a lapped blade 1/8" thick and just over 1 5/8" wide, with a bevel edge that is about 1 3/4", in PM-V11 steel. The depth-adjustment mechanism is fast and accurate. Set screws along the side allow repeatable blade positioning. The 9 3/4" long ductile cast iron body is machined with a 45° blade bed and weighs 3 1/2 lb.
Patented. Made in Canada.
A pair of 6" stainless-steel fence rods (2 1/2" longer than the rods supplied with the plane) is available separately.
Options:
Variations:
Veritas Right-Hand Skew Rabbet Plane – Manufacturing Second
About Veritas seconds: this stock of our right-hand PM-V11 skew rabbet plane (05P4577) has some minor cosmetic flaw – a scratch, a pit in the casting or tiny blemishes – but the plane is functionally perfect. Quantities of seconds are limited and expected to sell out quickly.
With a blade skewed at a 30° angle to reduce cut resistance and aid in shaving clearance, this plane cuts quickly and quietly, avoiding the set-up, noise and dust associated with power tools.
Corner cuts are clean and accurate. Tear-out on cross-grain work is reduced with a scoring spur that sits ahead of the blade. The 7 3/8" long fence allows a maximum rabbet width of 1 1/2" and is through-drilled to accept a wooden extension. An adjustable shoe controls the rabbet depth to a maximum 3/4" deep.
Supplied with a lapped blade 1/8" thick and just over 1 5/8" wide, with a bevel edge that is about 1 3/4", in PM-V11 steel. The depth-adjustment mechanism is fast and accurate. Set screws along the side allow repeatable blade positioning. The 9 3/4" long ductile cast iron body is machined with a 45° blade bed and weighs 3 1/2 lb.
Patented. Made in Canada.
A pair of 6" stainless-steel fence rods (2 1/2" longer than the rods supplied with the plane) is available separately.
