Veritas Chisel Plane – Manufacturing Second

Veritas Seconds Event
One Day – Online Only – Limited Stock

About Veritas seconds: this stock of our chisel plane (05P2101) has some minor cosmetic flaw – a scratch, a pit in the casting or tiny blemishes – but the tool is functionally perfect. Quantities of seconds are limited and expected to sell out quickly.

Rabbet planes used to be widely available, but are now being discontinued by manufacturers. We developed this specialized plane to convert a chisel into a rabbet plane.

The body is made of ductile cast iron and is configured to hold a 1" bevel-edge chisel at a 45° angle, the same pitch as used on bench planes. It becomes a small plane that works equally well as a shoulder plane or rabbet plane and can be used to clean up machine-cut rabbets and tenons. It works like a butt mortise plane for cutting hinge gains. It will also cut 1" dadoes and grooves up to a depth of 3/8".

Precisely machined. Overall size is 1 3/8" wide by 5 1/2" long by 2 1/2" high. The clamping screw is solid brass.

While it excels as a job-site plane, it is equally handy in the shop.

Made in Canada.