Quantity:
Veritas Seconds Event
One Day – Online Only – Limited Stock
About Veritas seconds: this stock of our PM-V11 small shoulder plane (05P4771) has some minor cosmetic flaw – a scratch, a pit in the casting or tiny blemishes – but the plane is functionally perfect. Quantities of seconds are limited and expected to sell out quickly.
Designed to seat nicely in the hand, our smallest shoulder plane is easily controlled using a one-handed grip.
The lever cap wraps around the rear of the body, shrouding the blade adjustment mechanism so it does not obstruct the grip while acting as a comfortable rest for the palm.
The through-hole and textured recesses cast into the side of the body provide grip points for fingers.
The plane weighs 1 lb 2 oz and has a 6 1/4" long, 1/2" wide sole. The ductile cast iron body is accurately machined and ground so that the sole and sides are flat and square.
The plane's adjustable toe lets you restrict the mouth for very fine shavings with minimum tear-out.
The low bed angle of 15° combined with the 25° blade bevel results in a cutting angle of 40° for exceptional end-grain cutting.
Set screws along the side let you accurately position the blade so it requires no lateral adjustment when replacing the blade after sharpening.
The lapped blade is 1/8" (0.125") thick and 1/2" wide, and made of PM-V11 tool steel.
Made in Canada. Patented.
Options:
Variations:
Veritas Small Shoulder Plane – Manufacturing Second
Veritas Seconds Event
One Day – Online Only – Limited Stock
About Veritas seconds: this stock of our PM-V11 small shoulder plane (05P4771) has some minor cosmetic flaw – a scratch, a pit in the casting or tiny blemishes – but the plane is functionally perfect. Quantities of seconds are limited and expected to sell out quickly.
Designed to seat nicely in the hand, our smallest shoulder plane is easily controlled using a one-handed grip.
The lever cap wraps around the rear of the body, shrouding the blade adjustment mechanism so it does not obstruct the grip while acting as a comfortable rest for the palm.
The through-hole and textured recesses cast into the side of the body provide grip points for fingers.
The plane weighs 1 lb 2 oz and has a 6 1/4" long, 1/2" wide sole. The ductile cast iron body is accurately machined and ground so that the sole and sides are flat and square.
The plane's adjustable toe lets you restrict the mouth for very fine shavings with minimum tear-out.
The low bed angle of 15° combined with the 25° blade bevel results in a cutting angle of 40° for exceptional end-grain cutting.
Set screws along the side let you accurately position the blade so it requires no lateral adjustment when replacing the blade after sharpening.
The lapped blade is 1/8" (0.125") thick and 1/2" wide, and made of PM-V11 tool steel.
Made in Canada. Patented.
