Cyber Monday
24K2204 - NWS Insulated (1000V) Combination Pliers, Straight
Quantity:
The German firm NWS (Nöthen Werkzeuge Solingen) makes tools that are widely recognized in Europe for exceptional quality, innovation and performance.
These pliers have inside jaw surfaces that are divided into six zones, each suited to a different range of tasks. Starting at the jaw tips, the first 1/16" section has smooth surfaces that meet flush, followed by a fine-toothed section, both providing a firm grip on various materials. The tapered gap in the middle of the jaws (sometimes called a "burner hole") serves as a wrench; teeth on either side are set with opposing bias for a solid grip on round materials up to 7/8" in diameter.
Next to the hinge, the robust 11/16" long side cutter has induction-hardened, double-bevelled edges capable of cutting cable, nails, screws or hardened wire up to 2.5mm (approx. 3/32"). The jaw recess opposite the side-cutters also has a pattern of points and flats to engage nuts or bolts from 1/2" to 7/8". A small slot near the jaw tips serves as a nail holder, used to steady a nail to drive it in a hard-to-reach spot.
Measures 8" long with a jaw capacity of 1 3/16".
These pliers have broad three-component grips that create a balance of cushioning for comfort, texture for control and rigidity for support.
Intended for use by electricians, these tools are certified to comply with the North American, European, and international standards for 1000VAC/1500VDC insulated tools and are marked accordingly with the “double triangle” symbol of ASTM F1505, VDE, and the “1000V” designation of IEC 60900.
Options:
Variations:
NWS Insulated (1000V) Combination Pliers, Straight
The German firm NWS (Nöthen Werkzeuge Solingen) makes tools that are widely recognized in Europe for exceptional quality, innovation and performance.
These pliers have inside jaw surfaces that are divided into six zones, each suited to a different range of tasks. Starting at the jaw tips, the first 1/16" section has smooth surfaces that meet flush, followed by a fine-toothed section, both providing a firm grip on various materials. The tapered gap in the middle of the jaws (sometimes called a "burner hole") serves as a wrench; teeth on either side are set with opposing bias for a solid grip on round materials up to 7/8" in diameter.
Next to the hinge, the robust 11/16" long side cutter has induction-hardened, double-bevelled edges capable of cutting cable, nails, screws or hardened wire up to 2.5mm (approx. 3/32"). The jaw recess opposite the side-cutters also has a pattern of points and flats to engage nuts or bolts from 1/2" to 7/8". A small slot near the jaw tips serves as a nail holder, used to steady a nail to drive it in a hard-to-reach spot.
Measures 8" long with a jaw capacity of 1 3/16".
These pliers have broad three-component grips that create a balance of cushioning for comfort, texture for control and rigidity for support.
Intended for use by electricians, these tools are certified to comply with the North American, European, and international standards for 1000VAC/1500VDC insulated tools and are marked accordingly with the “double triangle” symbol of ASTM F1505, VDE, and the “1000V” designation of IEC 60900.
