Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologoCart
Cart
VS1401 - Veritas Rip Tenon Saw – Manufacturing Second
VS1401 - Veritas Rip Tenon Saw – Manufacturing Second

Veritas Rip Tenon Saw, 9 tpi – Manufacturing SecondMade in Canada

Quantity:

Veritas Seconds Event
One Day – Online Only – Limited Stock

About Veritas seconds: this stock of our rip tenon saw (05T1401) has some minor cosmetic flaw on the handle or spine, or there is a gap between the spine and handle; performance of the saw is not affected. Quantities of seconds are limited and expected to sell out quickly.

Weighing just under 1 1/2 lb with a 16" blade, this is one of the largest saws in the Veritas line. The 9 tpi rip pattern blade is made from 0.024" thick high-carbon steel with 0.003" of set per side and a cut depth of nearly 4". The teeth have a 14° rake angle.

The saw is well balanced, with a spine molded from a mixture of stainless-steel powder for weight, glass fiber for stiffness and a polymer resin binder. The closed handle is configured for exceptional control for a saw of this size and weight, with a hardwood grip secured by a stainless-steel bolt and brass nut. The blade and handle-mounting bolt are molded into the spine, creating a solid blade/spine/mount assembly.

Made in Canada.

VS1401 - Veritas Rip Tenon Saw – Manufacturing Second

Options:

Variations:

  • VS1401 - Veritas Rip Tenon Saw, 9 tpi – Manufacturing Second
    1 - $134.00

Veritas Rip Tenon Saw, 9 tpi – Manufacturing Second

Veritas Seconds Event
One Day – Online Only – Limited Stock

About Veritas seconds: this stock of our rip tenon saw (05T1401) has some minor cosmetic flaw on the handle or spine, or there is a gap between the spine and handle; performance of the saw is not affected. Quantities of seconds are limited and expected to sell out quickly.

Weighing just under 1 1/2 lb with a 16" blade, this is one of the largest saws in the Veritas line. The 9 tpi rip pattern blade is made from 0.024" thick high-carbon steel with 0.003" of set per side and a cut depth of nearly 4". The teeth have a 14° rake angle.

The saw is well balanced, with a spine molded from a mixture of stainless-steel powder for weight, glass fiber for stiffness and a polymer resin binder. The closed handle is configured for exceptional control for a saw of this size and weight, with a hardwood grip secured by a stainless-steel bolt and brass nut. The blade and handle-mounting bolt are molded into the spine, creating a solid blade/spine/mount assembly.

Made in Canada.

Related Products

VS0501 - Standard Dovetail Saw, 14 tpi – Manufacturing Second
Veritas Standard Dovetail Saw – Manufacturing Second
Product Information