Q: What can I cut with the right-angle saw guide?
It guides square 90° cuts for finger joints, tenons and on-the-spot trimming of small items.
05T0401 - Right-Angle Saw Guide
After receiving many requests from our customers for a 90° version of our dovetail saw guide, we developed a right-angle saw guide for making finger joints, cutting tenons or on-the-spot trimming of small items. It is also ideal for beginners or children learning to make perfectly square perpendicular cuts on board ends.
Manufactured using the same precision-machined aluminum extrusion as our dovetail saw guides, each reference surface has an embedded 3/4" rare-earth magnet and is covered with a low-friction UHMW pad. The magnets keep the saw aligned as you cut; the pads allow the saw to slide easily against the reference surface. The clamp can accommodate material from 1/4" to 1" thick.
The guide can be used with any backless saw that has approximately 0.005" or less of tooth set. Our dovetail saw is available separately.
Made in Canada.
Patented.
It guides square 90° cuts for finger joints, tenons and on-the-spot trimming of small items.
It works with any backless saw that has about 0.005" or less of tooth set.
The clamp accommodates material from 1/4" to 1" thick.
Each reference surface has an embedded 3/4" rare-earth magnet that holds the saw against the face, and a low-friction UHMW pad lets the blade slide easily as you cut.
Yes, it is well suited to beginners or children learning to cut square across board ends.
No, the guide holds a backless saw of your own. Our dovetail saw is available separately.
The body is a machined aluminum extrusion with UHMW pads on the reference surfaces.
| Materials | Aluminum body; UHMW pads; rare-earth magnets |
| Dimensions | 3/4" dia. magnet in each reference surface |
| Compatibility | Accepts any backless saw with approximately 0.005" or less tooth set; clamps material 1/4" to 1" thick |
| Includes | Right-angle saw guide |
| Package Quantity | 1 item |
| Country of Origin | Canada |
| Warranty | Lee Valley Satisfaction Guarantee |
Options:
Variations:
Veritas Right-Angle Saw Guide
After receiving many requests from our customers for a 90° version of our dovetail saw guide, we developed a right-angle saw guide for making finger joints, cutting tenons or on-the-spot trimming of small items. It is also ideal for beginners or children learning to make perfectly square perpendicular cuts on board ends.
Manufactured using the same precision-machined aluminum extrusion as our dovetail saw guides, each reference surface has an embedded 3/4" rare-earth magnet and is covered with a low-friction UHMW pad. The magnets keep the saw aligned as you cut; the pads allow the saw to slide easily against the reference surface. The clamp can accommodate material from 1/4" to 1" thick.
The guide can be used with any backless saw that has approximately 0.005" or less of tooth set. Our dovetail saw is available separately.
Made in Canada.
Patented.
