Q: What is this saw guide used for?
It helps keep a backsaw square to a workpiece and is particularly useful when crosscutting tenon shoulders or defining the edges of a dado where a straight, true cut matters.
Tenon
This item is not available for this region.
These anodized aluminum guides help keep a saw square to a workpiece. They are particularly useful when crosscutting tenon shoulders or defining the edges of a dado, since the guide helps a backsaw track straight and true.
Held against a workpiece with a hand or secured with clamps (not included), it provides a registration surface, about 1 1/4" tall, to help maintain accuracy throughout the cut. The machined reference face has three embedded 1/2" dia. rare-earth magnets and is covered with a strip of low-friction UHMW tape. The magnets help maintain tool contact with the guide while the tape allows tools to glide along the reference face.
The bottom of the guide has two high-friction strips to resist slipping on a surface. It also has a T-slot to accept a pair of 2" capacity clamps (available separately). These clamps make the guide easy to secure with accuracy, particularly if you have the use of only one hand.
The guides are available in 8" and 14" lengths. Replacement packages, available separately, include two high-friction strips and two UHMW strips.
Made in Canada.
It helps keep a backsaw square to a workpiece and is particularly useful when crosscutting tenon shoulders or defining the edges of a dado where a straight, true cut matters.
Three embedded 1/2" diameter rare-earth magnets in the reference face help maintain contact between the saw and the guide, while a low-friction UHMW tape strip lets the saw glide smoothly along that face.
No, you can hold the guide against the workpiece by hand, though securing it with clamps (not included) can help maintain accuracy throughout longer or repeated cuts.
| Materials | Anodized aluminum; embedded rare-earth magnets; UHMW tape; high-friction tape |
| Color/Finish | Black |
| Dimensions | 1 1/4" tall registration surface; 8" or 14" long |
| Includes | Magnetic saw guide |
| Package Quantity | 1 kit |
| Country of Origin | Canada |
| Warranty | Lee Valley Satisfaction Guarantee |
Options:
Length
Variations:
Veritas Magnetic Saw Guides
These anodized aluminum guides help keep a saw square to a workpiece. They are particularly useful when crosscutting tenon shoulders or defining the edges of a dado, since the guide helps a backsaw track straight and true.
Held against a workpiece with a hand or secured with clamps (not included), it provides a registration surface, about 1 1/4" tall, to help maintain accuracy throughout the cut. The machined reference face has three embedded 1/2" dia. rare-earth magnets and is covered with a strip of low-friction UHMW tape. The magnets help maintain tool contact with the guide while the tape allows tools to glide along the reference face.
The bottom of the guide has two high-friction strips to resist slipping on a surface. It also has a T-slot to accept a pair of 2" capacity clamps (available separately). These clamps make the guide easy to secure with accuracy, particularly if you have the use of only one hand.
The guides are available in 8" and 14" lengths. Replacement packages, available separately, include two high-friction strips and two UHMW strips.
Made in Canada.