05K3010 - Super-Hard Scrapers, set of 4
Thickness:
Choose an option to view item availability.
Most cabinet scrapers are sheared from spring steel, hardened to Rc38-42. These scrapers are harder (Rc48-52) and hold an edge longer. The edges are carefully milled to a square, sharp 90° ready for immediate use on fine work. For heavy-duty use, a hook must be burnished onto them. The prepared edges not only save you the initial effort of filing and stoning, but indicate the condition they should be in the next time you intend to put a hook on them.
The scrapers come in four thicknesses. The two thinnest, used for fine work, are 2" × 6" (50mm × 150mm). The two thicker ones are 2 3/8" × 6" (60mm × 150mm) and are for heavier stock removal, the 1mm scraper being suitable for paint removal. All come with edge guards and complete resharpening instructions.
Available individually or as a set of four.
For fine work, no. The edges are milled to a sharp, square 90° at the factory and are ready to use immediately. For heavier stock removal or if a hook is desired, you would burnish the milled edge – but no filing or stoning is required first.
0.4mm and 0.6mm are 2" × 6" and suited for fine finishing work. 0.8mm and 1mm are 2 3/8" × 6" and intended for heavier stock removal; the 1mm thickness is suitable for paint removal.
Standard cabinet scrapers are typically sheared from spring steel hardened to Rc38-42. These scrapers are hardened to Rc48-52, giving a harder edge that holds its shape longer under repeated use before needing to be reburnished.
The milled square edge serves as a reference for resharpening. When a burnished hook has been used down, the edge is refiled and stoned back to the same square, sharp condition as when it left the factory – the milled edge on each fresh scraper shows what that target condition looks like.
Yes. Each scraper includes edge guards for safe handling and storage.
| Materials | Hardened steel, Rc48-52 |
| Dimensions | 2" × 6" (0.4mm or 0.6mm thick) or 50mm × 150mm); 2 3/8" × 6" (0.8mm or 1mm thick) |
| Includes | Scraper(s); edge guards; resharpening instructions |
| Package Quantity | 1 item or set of 4 |
| Warranty | Lee Valley Satisfaction Guarantee |
Options:
Thickness
Variations:
Super-Hard Milled Scrapers
Most cabinet scrapers are sheared from spring steel, hardened to Rc38-42. These scrapers are harder (Rc48-52) and hold an edge longer. The edges are carefully milled to a square, sharp 90° ready for immediate use on fine work. For heavy-duty use, a hook must be burnished onto them. The prepared edges not only save you the initial effort of filing and stoning, but indicate the condition they should be in the next time you intend to put a hook on them.
The scrapers come in four thicknesses. The two thinnest, used for fine work, are 2" × 6" (50mm × 150mm). The two thicker ones are 2 3/8" × 6" (60mm × 150mm) and are for heavier stock removal, the 1mm scraper being suitable for paint removal. All come with edge guards and complete resharpening instructions.
Available individually or as a set of four.
