99W3973S - Set of 3 Carbide-Tipped Turning Tools & Replacement Tips
Quantity:
Until March 28, 2026, save 43% on this set of three tools with two sets of replacement tips.
This is an excellent set of basic carbide-tipped turning tools.
With durable carbide tips and a shaft design that permits excellent control, they are outstanding turning tools. The shafts are machined flat on the underside to register squarely on the rest, so you can maintain a smooth cut by simply advancing or retracting the tool while moving it laterally. When the tips begin to wear, you can simply loosen the locking screw and rotate the tip to present a fresh edge.
Scaled for smaller work, each tool measures about 11" overall, with a contoured beech handle for a comfortable, secure grip.
The roughing tool has a 7/16" square tip with slightly radiused sides. It is primarily used for rapid stock removal and can also be used for finishing cuts on outside curves.
The finisher has a 1/2" diameter round tip for working inside vessels or cutting coves on spindles.
The detailer has a 7/16" × 1 1/8" double-ended diamond-shaped tip, suitable for cutting narrow beads and coves.
Two full sets of replacement tips are included (additional sets can be purchased separately).
A great buy on very useful tools!
Options:
Variations:
Set of 3 Carbide-Tipped Turning Tools & Replacement Tips
Until March 28, 2026, save 43% on this set of three tools with two sets of replacement tips.
This is an excellent set of basic carbide-tipped turning tools.
With durable carbide tips and a shaft design that permits excellent control, they are outstanding turning tools. The shafts are machined flat on the underside to register squarely on the rest, so you can maintain a smooth cut by simply advancing or retracting the tool while moving it laterally. When the tips begin to wear, you can simply loosen the locking screw and rotate the tip to present a fresh edge.
Scaled for smaller work, each tool measures about 11" overall, with a contoured beech handle for a comfortable, secure grip.
The roughing tool has a 7/16" square tip with slightly radiused sides. It is primarily used for rapid stock removal and can also be used for finishing cuts on outside curves.
The finisher has a 1/2" diameter round tip for working inside vessels or cutting coves on spindles.
The detailer has a 7/16" × 1 1/8" double-ended diamond-shaped tip, suitable for cutting narrow beads and coves.
Two full sets of replacement tips are included (additional sets can be purchased separately).
A great buy on very useful tools!
