Description
With this jig, you can create a work surface based on the same concept as the Festool MFT/3 multifunction table, but sized and configured exactly to your needs.
An upgrade of the original UJK Parf guide drilling system, the jig offers a straightforward, reliable way to space 20mm holes on 96mm centers, ensuring they are accurately square to one another in each axis. The system includes a pair of 1m rules that are used as templates for drilling starter holes. Made of stainless steel with a low-glare satin-chrome finish, each rule has a series of CNC-drilled holes that accept included 90° drill-guide bushings, which are made of hardened steel for wear resistance and have side vents for chip clearance.
It comes with a 3mm bit (compatible with standard hex chucks as well as Festool Centrotec chucks) and 3mm indexing pins, each with a knurled collar for grip. To enlarge the starter holes to 20mm, it also comes with an aluminum guide block and a 20mm carbide-tipped drill bit that has a machined shaft to ensure minimal play within the bronze bushings of the guide block. Includes a dust extraction port and complete instructions.
Made in U.K.
Not available for shipment to Québec.
